Emission spectrum: IR: 2.7 ~ 11μm, UV: 180~300nm
Applicable distance: ≤50cm
Humidity range: 0 ~ 95%RH (without condensation)
Emission angle: ≤30°
Temperature range: -10℃～+55℃
INFD-01 intelligent flame simulator is specially designed for the testing of UV(ultraviolet), IR(single-band infrared), IR2 (dual-band infrared), IR3(three-band
INFD-01 intelligent flame simulator is specially designed for the testing of UV(ultraviolet), IR(single-band infrared), IR2 (dual-band infrared), IR3(three-band infrared), IR/UV(infrared/ultraviolet) type flame detectors, and it is convenient for users to test the flame detectors at the sites where the use of open flames is not allowed. The detection frequency of infrared flame detectors vary with different manufacturers, and this product is suitable for the 0 ~ 10Hz infrared flame detectors.
Flame-proof flame simulator
Stainless steel material
4~20mA standard analog signal output
Specially designed for testing of various IR-UV flame detectors
Compact and lightweight
Battery rechargeable type
| Emission spectrum | IR: 2.7 ~ 11μm UV: 180~300nm | Applicable distance | ≤50cm |
| Humidity range | 0 ~ 95%RH (without condensation) | Emission angle | ≤30° |
| Temperature range | -10℃～+55℃ | Operating voltage | 22V |
| Pressure range | 86KPa～106 KPa | Battery type | Lithium (Li) |
| Shell material | 316L | Battery capacity | 4000mAh |
| Overall weight | 1.8Kg | Transmit power | ＜15mW |
| Overall dimension | 77mm×100mm×210mm | Degree of protection | Reach IP66 |
| Explosion-proof mark | Ex db IIC T6 Gb，Ex tb IIIC T80℃ Db | ||
For all inquiries, please fill in the form below(* are required) to send us a brief message, and we will get back to you as soon as possible.
