The electrochemical gas sensor is a kind of gas sensor that utilizes the principle of electrocatalysis for detection of gases.
The electrochemical gas sensor is a kind of gas sensor that utilizes the principle of electrocatalysis for detection of gases. Depending on the difference in th
The electrochemical gas sensor is a kind of gas sensor that utilizes the principle of electrocatalysis for detection of gases. Depending on the difference in the catalyst and design, this sensor can detect oxygen, carbon monoxide, hydrogen sulfide, ammonia, hydrogen cyanide and other gases, respectively. The product application areas include the safety monitoring of industrial gases, the monitoring of gases on agricultural and animal husbandry sites, odor monitoring, environmental pollution monitoring and other fields.
| Performance parameter | |
| Product model | CO-1000 |
| Range | 0~1000 PPM |
| Maximum load | 2000 PPM |
| Sensitivity | 80±20nA/PPM |
| Baseline (20℃) | <±0.2μA |
| Baseline drift | <3 PPM |
| Resolution | 1 PPM |
| Response time (T90.) | <30S |
| Linearity | Linearity to 2000 PPM |
| Long-term stability | < 2% signal value/month |
| Operating conditions | |
| Operating temperature | -40℃~50℃ |
| Operating humidity | 15%~90% RH (without condensation) |
| Operating pressure | 90 ~110 kPa |
| Bias voltage | 0 mV |
| Storage time | 6 months (in special packing box) |
| Storage temperature | 10~30℃ |
| Service life | 2 years in the air |
| Warranty term | 24 months |
| Weight | About 5g |
For all inquiries, please fill in the form below(* are required) to send us a brief message, and we will get back to you as soon as possible.
